Download SP Flash Tool 2023 Latest Version Free
SP Flash Tool, also known as Smart Phone Flash Tool, is a Windows-based firmware flashing software for MediaTek (MTK) devices. It is used to flash firmware, custom recovery, and other files to MediaTek-based Android devices.
The tool allows you to flash firmware files in scatter file format, which are typically provided by device manufacturers or firmware developers. These files contain information about the device’s memory layout and partitions, and are used to properly write the firmware to the device’s internal storage.
SP Flash Tool can also be used to back up and restore firmware, format or erase partitions, and even unbrick a bricked device. It is a powerful tool that can be used to perform various tasks on MediaTek-based devices, but it should be used with caution as it has the potential to cause permanent damage to the device if used improperly.
It’s important to note that, sometimes, the firmware files are not publicly available. Additionally, it’s very important to use the firmware that corresponds to your device specific model and version, using the wrong firmware can cause permanent damage to the device.
How To Flash MediaTek SP Flash Tool
- Downloaded and install the latest version of SP Flash Tool on your computer.
- Downloaded the firmware file for your device. Make sure the firmware corresponds to your device’s model and version.
- Extract the firmware file, and locate the “scatter file” (usually with the extension .txt or .mdt).
- Open SP Flash Tool, and click on the “Scatter-loading” button. Browse to the location of the scatter file and select it.
- In the SP Flash Tool interface, you will see a list of partitions. Make sure that the firmware files are properly loaded for the partitions you want to flash.
- Connect your device to the computer using a USB cable. Make sure that the device is in “Download mode” or “Firmware upgrade mode” (instructions for entering this mode vary depending on the device).
- Click on the “Download” button in the SP Flash Tool interface. The flashing process will begin.
- Wait for the process to complete, and do not disconnect the device or turn off the computer during the process.
- Once the flashing process is completed, you will see a “Download OK” message in the SP Flash Tool window.
- Disconnect your device from the computer and power it on.
